top of page
RtR OWT85

RtR OWT85

RTR Elite OWT65, OWT75 and OWT85 ON-WALL TOWERS
These On-Wall Towers hug the left and right sides of Big Screen TVs and are designed to replace obtrusive Floor Towers -- which looked fine alongside large old 20" deep floor console tube TVs -- but not below thin on-wall flat screens. The custom sizes match the heights of 65", 75" and 85" TVs.
  • Left + Right RTR Elite on-Wall Tower + matching Center speaker delivers much greater Dynamic output and Separation compared to any/all Soundbars.
  • When matched with a Subwoofer Crossover set at 80Hz or higher the OWTs equal popular large floor towers in dynamic output while placing the audio where it belongs- On-the-Wall-next to the TV.
  • The depth of the On-Wall Towers matches the depth of the front of wall-mounted TVs. This results in Greater mid/upper Bass Dynamic Output compared to popular slim On-wall Arrays with depths of only 1.5" to 2.75".
  • Four (4) extra woofer cones, called Passive Radiators, enable the active woofers to move twice as much air -- resulting in Lower Distortion, Increased Dynamic Output, as well as Deeper Bass Extension.
  • The OWT 65, 75 and 85 are best for wall mounted TVs when the bottom of the TV is at least 40" from the floor. Otherwise, the OWCLR35B or OWCLR33A are a better match."
  • The Downward Angle beams sound down to your ears -- instead of above your head.
  • The RTR Elite on-Wall Towers free-up floor space and as an added bonus, hide from view the ugly wall mount and wires.
 
SPECIFICATIONS: (THX recommends frequency response extension to 60Hz)
 
OWT65
OWT75
OWT85
Freq. Resp +/- 3dB:
Below 60Hz to above 25kHz for All On-Wall Towers
Power Handling:
100 RMS
100 RMS
100 RMS
Impedance:
4-ohm   compatible with 8 ohm-rated Receivers
Tweeter:
3/4" Dome
3/4" Dome
3/4" Dome
Woofer (All Models):
(2) long throw 4.5" polypropylene with extension below 60Hz
All Models:
(4) extra woofer cones to Increase Output and Bass Extension
Sub Crossover:
80 Hz or higher
Crossover (All Models):
12dB per octave slope
Terminals (All Models):
Gold-plated Binding Posts with #14-gauge capacity
Height and Width:
32.5"H x 5"W
37.5"H x 5"W
43"H x 5"W
Depth Top x Bottom:
5.5"T x 3.5"B
6"T x 3.5"B
6.5"T x 3.5"B
Enclosures:
Internally braced MDF for best sound reproduction
Finish (All Models):
Matt Black Vinyl
Wall Mounts (All Models):
Heavy duty 4-way Key-Hole mounts
Weight:
15 lbs.
16 lbs.
17 lbs.
Standard Pack:
(1) each
(1) each
(1) each
Carton H x W x D:
36.8" x 9.6" x 8.9"
41.6" x 10.1" x 8.9"
47" x 10.6" x 8.9"
Carton Weight:
16.5 lbs
19 lbs
21.8 lbs
Wall Mount Template:
Included for all models
 
    bottom of page